imirr

Guides

How to Mirror an iPhone to a TV (Every Method, Compared)

AirPlay, a cable, or a wireless dongle — which one actually works depends on your TV and what you're trying to watch. Here's how to pick.

By the imirr team · Updated · 5 min read

Short answer

If your TV has AirPlay 2 built in (most Samsung, LG, Sony and Vizio TVs from the last few years, or any Apple TV), open Control Center on your iPhone and tap Screen Mirroring — no cable, no extra hardware. If it doesn't, you need either a wired adapter (works with any TV with HDMI, no WiFi needed) or a wireless dongle that plugs into the TV's HDMI port and pretends to be an AirPlay receiver.

Method 1: AirPlay (built into your iPhone, free)

AirPlay is Apple's own screen-mirroring protocol, built into every iPhone's Control Center. According to Apple's AirPlay page, it works out of the box with Apple TV and with TVs and devices that have AirPlay 2 built in by their manufacturer — Apple's page lists this as a feature TV makers license and add themselves, so which exact models support it depends on the manufacturer, not Apple.

  1. Connect to the same WiFi

    Your iPhone and TV need to be on the same WiFi network — this doesn't work over cellular or across networks.

  2. Open Control Center

    Swipe down from the top-right corner of the screen (or up from the bottom on older iPhones with a Home button).

  3. Tap Screen Mirroring

    Your iPhone will search for nearby AirPlay receivers and list them by name.

  4. Select your TV

    Tap your TV's name from the list. If it asks for a code shown on the TV screen, enter it.

  5. Stop anytime

    Open Control Center again and tap Stop Mirroring, or turn off the TV.

One thing worth knowing: AirPlay sends a secure video stream directly, rather than screen-recording what's on your phone. That's why DRM-protected video (Netflix, Disney+ and similar) plays correctly over AirPlay to a licensed receiver — it doesn't hit the same block that trips up screen-recording-based apps (more on that below).

Not sure if your TV has AirPlay 2?

Check the TV's own settings menu (usually under Apple AirPlay Settings or Network) or your TV's manual. We haven't published a tested, brand-by-brand list yet — see our compatibility page for what's been verified so far.

Method 2: a wired adapter (works with any TV, no WiFi)

If your TV has an HDMI port but no AirPlay, a Lightning-to-HDMI or USB-C-to-HDMI adapter is the simplest fix. It plugs straight into your iPhone's port on one end and an HDMI cable on the other. There's no app, no pairing, and no WiFi dependency — it works because the adapter taps your iPhone's display output directly, the same way a monitor cable would on a laptop.

  • Works with: any TV or monitor with an HDMI input, regardless of brand or age.
  • Needs: an HDMI cable (sometimes sold separately) and, on some adapters, a charging cable plugged into a spare port so the adapter has power.
  • Plays protected video correctly, since it's a direct video signal rather than a network stream or screen recording.
  • Downside: you're tethered by the cable length, and it's one more thing to carry.

Method 3: a wireless HDMI dongle (for TVs without AirPlay)

If your TV doesn't have AirPlay 2 and you don't want a cable, a small HDMI dongle that plugs into the TV can work instead. Most of these reimplement Apple's AirPlay protocol themselves (it isn't officially licensed to them for video receivers the way it is for audio speakers), so your iPhone sees them as a normal AirPlay target in Control Center — no app required on your phone. We go into how these actually work, and the licensing gray area behind them, in a separate post.

Why mirroring sometimes stops working after an iOS update

Because most of these dongles reimplement Apple's protocol independently rather than through an official license, an iOS update can occasionally break compatibility until the dongle's maker ships a firmware fix. If yours stops working after an update, check for a firmware update from the manufacturer before assuming the hardware is faulty.

What doesn't work the way people expect

MethodNeeds WiFi?Needs a cable?Plays DRM video?
AirPlay (built in)YesNoYes
Wired HDMI adapterNoYesYes
Wireless AirPlay-clone dongleYesNoYes
Generic "screen recorder" casting appsYesNoOften no — shows black

A lot of general-purpose "cast iPhone to [TV brand]" apps work by recording your screen with Apple's ReplayKit and re-streaming that recording to a receiver like Chromecast or Fire TV. iOS deliberately blocks screen recording of DRM-protected video, so those apps show a black rectangle wherever a protected video app would be. This isn't a bug in the app — it's how iOS protects studio content. If you need to watch protected streaming video on a bigger screen, use AirPlay or a wired adapter instead, or the streaming app's own built-in Cast button where one exists.

Mirroring to a Mac or a Windows PC instead

If the "TV" in question is really a monitor connected to a computer, the options are different again — macOS has its own built-in iPhone Mirroring feature, and Windows has no native equivalent. We cover both in dedicated guides (coming soon).

Frequently asked questions

Do I need an app to mirror my iPhone to a TV?

Not for AirPlay or a wired adapter — both work without installing anything. Some wireless dongles and most "cast to [brand] TV" apps do require an app, and the app-based casting route is the one that can't show DRM-protected video.

Why is my screen mirroring showing a black screen for Netflix or Disney+?

This almost always means the mirroring method is screen-recording your display rather than sending a secure video stream — iOS blocks screen recording of DRM-protected video. Switch to AirPlay (if your TV supports it) or a wired HDMI adapter, both of which play protected video correctly.

Does AirPlay work without WiFi?

No — AirPlay needs your iPhone and the receiver (TV, Apple TV, or dongle) on the same WiFi network. For a WiFi-free option, use a wired Lightning/USB-C to HDMI adapter instead.

My TV is a few years old — will any of this work?

If it has an HDMI port, a wired adapter will work regardless of the TV's age or brand. AirPlay and wireless dongles depend on either built-in support (newer TVs) or compatibility with the dongle's protocol — check your TV's settings menu for an AirPlay or Screen Mirroring option.

See something inaccurate or out of date? Email support@imirr.com.